Ortofon MC Rondo Red
The Rondo Red is a very homogeneous all round cartridge meaning that sound image will tend to less dynamic strength and smoother reproduction-working perfect with all sorts of not very complex music.
The Rondo Red has a very fine polished elliptical diamond is mounted on a cylindrical aluminum cantilever.
The cartridge is clearly out of the same family of sound as Bronze and Blue – all of them taking benefit from the wooden housings.
Recommended load around 100 Ohm or even higher if added “air“ might be preferred.
Technical data
| Output voltage at 1000 Hz, 5cm/sec. |
0,5 mV |
| Channel balance at 1 kHz |
2 dB |
| Channel separation at 1 kHz |
22 dB |
| Channel separation at 15 kHz |
15 dB |
| Frequency range at - 3dB |
20-30.000 Hz |
| Frequency response |
20-20.000 Hz ±2 dB |
| Tracking ability at 315Hz at recommended tracking force *) |
80 µm |
| Compliance, dynamic, lateral |
15 µm/mN |
| Stylus type |
Nude elliptical aluminium cantilever |
| Stylus tip radius |
r/R 8/18 µm |
| Tracking force range |
2-2,5 g (20-25 mN) |
| Tracking force, recommended |
2,3 g (23 mN) |
| Tracking angle |
20° |
| Internal impedance, DC resistance |
6 Ohm |
| Recommended load impedance |
10-200 Ohm |
| Cartridge body material |
Grinded wood/Resin comp. |
| Cartridge colour |
Red |
| Cartridge weight |
10,5 g |
| *) Typical value |
 |
|
Hi-Fi Choice